SUGGESTED USES:HD-2001 was designed for use in textile applications that require a soft hand coupled with very good strength, abrasion resistance, excellent adhesion, and excellent resiliency. Due to its overall properties, HD-2001 can be used as a finish or a coating. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates. HD-2001 is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance. The low melt temperature also allows HD-2001 to be used as a heat seal coating. When properly formulated, HD-2001 can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics.
CHARACTERISTICS:
Superior flexibility
Soft, tough, flexible film
Excellent UV resistance
Good abrasion resistance
Superior low temperature, flex-crack resistance
Low melting point (265°F).
APPLICATION:Spray or pad -- solids may be adjusted for optimum add-on.
May be thickened with HA-921 for knife coating.
CURING:No crosslinking suggested for heat seal coatings.
Melamine-formaldehyde (3 - 6 phr) provides improved performance.
PHYSICAL PROPERTIES
TENSILE PROPERTIES
SOLIDS: 40.0%
(Tested at 20 inches/minute)
VISCOSITY: 50-500 cps
ELONGATION: 550 %
pH: 7.5-10.0
ULT. TENS. STR.: 4,000 PSI
DENSITY: 8.9 lb/gal
100% MODULUS: 500 PSI
SOFTENING POINT: 265°F
200% MODULUS: 900 PSI
VOC CONTENT: 13.8% (As supplied)
300% MODULUS: 1,500 PSI
REACH Pre-Registration Notice
Hauthaway is fully compliant with the pre-registration requirements of REACH.
All substances in our polyurethane products and all monomers used to make our polymers have been pre-registered.
Have Questions? Call us at 781-592-6444 or contact our distributors Let's discuss the possibilities.