SUGGESTED USES:HD-2101 was designed primarily for use on flexible substrates as a coating, saturant or impregnant.
CHARACTERISTICS:
Outstanding toughness and abrasion resistance
Excellent water and chemical resistance
Exceptionally high melting point for a medium soft polymer
Can be crosslinked to enhance performance
Dilution and clean-up with ordinary tap water
Contains n-methyl pyrrolidone (NMP) co-solvent
APPLICATION:HD-2101 can be used as a sole vehicle or blended with harder polyurethane dispersions or acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.
CURING:HD-2101 can be air dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
PHYSICAL PROPERTIES
TENSILE PROPERTIES
SOLIDS: 40%(±1%)
(TESTED AT 20 INCHES/MINUTE)
VISCOSITY: 75-200 cps
ELONGATION: 500%
pH: 8.5-10.0
TENSILE STRENGTH: >5000 PSI
DENSITY: 8.8 lbs/gal
100% MODULUS: 700 PSI
VOC CONTENT: 145 gm/l (as supplied)
200% MODULUS: 1100 PSI
SOFTENING POINT: 325°F
300% MODULUS: 2000 PSI
SWARD HARDNESS: 10
REACH Pre-Registration Notice
Hauthaway is fully compliant with the pre-registration requirements of REACH.
All substances in our polyurethane products and all monomers used to make our polymers have been pre-registered.
Have Questions? Call us at 781-592-6444 or contact our distributors Let's discuss the possibilities.