Since 1852
Hauthane HD-3011

   

DESCRIPTION:A low cost, aromatic, polyether-based, aqueous polyurethane dispersion.

SUGGESTED USES:HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical. Its dry surface and high melting point properties prevent blocking problems. Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications. Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.

CHARACTERISTICS:

  • Medium soft, tough, flexible film
  • Unusually dry surface for non-blocking applications
  • High melting for thermal stability
  • Can be crosslinked with melamines or aziridines for true thermoset character and increased adhesion
  • Excellent hydrolytic stability
  • Contains n-methyl pyrrolidone (NMP) co-solvent

APPLICATION:HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for alternative application methods.

CURING:HD-3011 can be air dried at ambient room temperatures. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.

PHYSICAL PROPERTIES TENSILE PROPERTIES
SOLIDS: 35%(+/- 1%) (TESTED AT 20 INCHES/MINUTE)
VISCOSITY: 50-200 cps ELONGATION: 450%
pH: 7.0-9.5 TENSILE STRENGTH: > 4000 PSI
DENSITY: 8.4 lbs/gal 100% MODULUS: 1100 PSI
VOC CONTENT: 0.52 lbs/gal 200% MODULUS: 1600 PSI
SOFTENING POINT: 300EF 300% MODULUS: 2000 PSI
SWARD HARDNESS: 12

 

REACH Pre-Registration Notice
Hauthaway is fully compliant with the pre-registration requirements of REACH.
All substances in our polyurethane products and all monomers used to make our polymers have been pre-registered.
Have Questions? Call us at 781-592-6444 or contact our distributors Let's discuss the possibilities.
Email: info@hauthaway.com