Since 1852
Hauthane HD-5002

   

DESCRIPTION:A cost effective, aliphatic polyurethane / acrylic hybrid dispersion with an exceptional balance of properties.

SUGGESTED USES:HD-5002 was designed for coatings applications on a wide variety of plastic substrates, including ABS, Lexan, Noryl and polystyrene where abrasion and chemical resistance properties are required.

CHARACTERISTICS:

  • Extreme toughness, abrasion and mar resistance
  • Broad adhesion latitude to plastics
  • Outstanding water and chemical resistance
  • Excellent exterior weathering performance
  • Can be crosslinked to enhance performance
  • Dilution and clean-up with ordinary tap water
  • Contains n-methyl pyrrolidone (NMP) co-solvent

APPLICATION:HD-5002 can be used as a sole vehicle for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.

DRYING:HD-5002 can be air dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.

PHYSICAL PROPERTIES TENSILE PROPERTIES
SOLIDS: 40%(+/- 1%) (TESTED AT 2 INCHES/MINUTE)
VISCOSITY: 50-250 cps ELONGATION: NA
pH: 8.0 - 9.5 TENSILE STRENGTH: NA
DENSITY: 8.7 lbs/gal 100% MODULUS: NA
SOFTENING POINT: 305EF 200% MODULUS: NA
VOC CONTENT: 50 gm/l 300% MODULUS: NA
SWARD HARDNESS: 52  
PENCIL HARDNESS: H  

 

REACH Pre-Registration Notice
Hauthaway is fully compliant with the pre-registration requirements of REACH.
All substances in our polyurethane products and all monomers used to make our polymers have been pre-registered.
Have Questions? Call us at 781-592-6444 or contact our distributors Let's discuss the possibilities.
Email: info@hauthaway.com